The Front Panel - Dell SonicWALL NSA 6600 Getting Started Manual

NSA_6600_GSG.book Page 7 Wednesday, April 3, 2013 4:52 PM

The Front Panel

Console Port
Access the SonicOS Command Line Interface
(CLI) via the enclosed serial CLI cable
SonicWALL NSA 6600
USB Ports (2)
For 3G/4G/Analog modem adaptor support
Reset Button
Press and hold for several seconds to set the
appliance into Safe Mode.
LED Indicators
Power: Blue: Indicates power supplies are operating correctly
Yellow: Indicates a disconnected power supply
Test: Quick Blinking Yellow: Initializing
Slow Blinking Yellow: SafeMode
Solid Yellow: Test mode
Alarm: Indicates alarm activity in Red LED
M0: Indicates Expansion Module 0 activity in Red LED
SDHC Port
Secure Digital High-Capacity (SDHC) port
for future use
Management Port
1 Gigabit Ethernet
Management Interface
10GE
X14
X18 X16
SDHC
M0
ALARM
TEST
PWR
CONSOLE MGMT X19 X17 X15
X16-X19 (10 GE SFP+)
10 Gigabit Ethernet hot-pluggable ports
*X16, X18, and X19 are designated with a 'dot' to
signify ports with a direct uplink to the appliance
CPU for maximum throughput ; X17 shares the
CPU uplink with X0-X15.
Bypass Status
Turns on when
fail-to-wire bypass
mode is active
1GE 1GE
X12 X10 X8 X6 X4 X2 X0
BYPASS
STATUS
X13 X11 X9 X7 X5 X3 X1
X0-X7 (1 GE)
High-speed copper
Gigabit Ethernet ports
X8-X15 (1 GE SFP)
1 Gigabit Ethernet hot-pluggable
SFP interfaces for high-speed fiber or
copper Ethernet communication
The Front Panel | 7