Table of Contents
Advertisement
Reinforcing the Bass Sound
ONLY FOR CA-HXZ7V:
You can select one of the 4 bass levels. This function only
affects the playback sound, but does not affect your
recording. The bass level can be adjusted in 4 steps—LEVEL
0 (BASS OFF), LEVEL 1, LEVEL 2, LEVEL 3 and LEVEL
4 (MAX LEVEL).
Press ACTIVE BASS EX. LEVEL + to
increase the subwoofer level or ACTIVE
BASS EX. LEVEL – to decrease it.
ACTIVE BASS EX. lamp lights up in red.
• The ACTIVE BASS EX. lamp lights up in red when LEVEL 1 to
LEVEL 4 (MAX LEVEL) is selected. The lamp turns off when
LEVEL 0 (MIN LEVEL) is selected.
ONLY FOR CA-HXZ9V/CA-HXZ98V:
You can select one of the 4 subwoofer levels. This function
only affects the playback sound, but does not affect your
recording. The subwoofer level can be adjusted in 4 steps—
LEVEL 0 (MIN LEVEL), LEVEL 1, LEVEL 2, LEVEL 3,
and LEVEL 4 (MAX LEVEL).
Press SUBWOOFER LEVEL + to
increase the subwoofer level or
SUBWOOFER LEVEL – to decrease it.
SUBWOOFER lamp lights up in red.
• The SUBWOOFER lamp lights up in red when LEVEL 1 to
LEVEL 4 (MAX LEVEL) is selected. The lamp turns off when
LEVEL 0 (MIN LEVEL) is selected.
Selecting the Sound Turbo Mode
When SOUND TURBO button is activated, subwoofer level
is automatically set to level 4 (max), and the lowest
frequencies and the highest frequencies will be enhanced
further than the currently played level.
For CA-HXZ7V:
ACTIVE BASS EX.
LEVEL
SUBWOOFER
LEVEL
For CA-HXZ9V/
CA-HXZ98V:
Selecting the Sound Modes
You can select one of the 6 preset sound modes (3 surround
modes and 3 SEA—Sound Effect Amplifier—modes) and 3
user modes. This function only affects the playback sound,
but does not affect your recording. Each Sound Mode has its
own illumination display.
To select the sound modes, turn
SOUND MODE (or press SOUND MODE
on the remote control) until the sound mode
you want appears on the display.
• When a sound mode is selected, the lamp for the selected sound
mode (in this example, DANCE) flashes while the other sound mode
lamps light up.
• When any of the user modes (USER1, USER2 or USER3) is
selected or when the sound mode is cancelled ("OFF" is selected),
all sound mode lamps go off.
The sound modes change as follows:
DANCE
OFF
(Canceled)
USER 3
USER 2
When using the remote control, the sound mode changes only
clockwise in the above sequence.
Surround modes*
DANCE:
Increases resonance and bass.
HALL:
Adds depth and brilliance to the sound.
STADIUM: Adds clarity and spreads the sound, like in an
outdoor stadium.
SEA (Sound Effect Amplifier) modes
ROCK:
Boosts low and high frequency. Good for acoustic
music.
POP:
Good for vocal music.
CLASSIC:
Good for classical music.
User Modes
USER 1/2/3: Your individual mode stored in memory. See
"Creating Your Own Sound Mode—User
Mode" on page 12.
OFF:
The sound mode is canceled.
* Surround elements are added to the SEA elements to create a
being-there feeling in your room.
– 11 –
HALL
STADIUM
ROCK
USER 1
CLASSIC
SOUND
MODE
POP
Hide quick links:
Advertisement
Table of Contents
