GE 16 Owner's Manual And Installation Instructions page 58

Care and cleaning of the range.
Oven Vent
On glass cooktop models, the oven is vented
through an opening at the rear of the
cooktop.
On coil cooktop models, the oven is vented
through an opening under the right rear
surface unit.
Painted Surfaces
(on some models)
Painted surfaces include the sides of the
range and the sides of the door trim.
To clean the painted surfaces, use a hot,
damp cloth with a mild detergent suitable for
these surfaces. Use a clean, hot, damp cloth
to remove soap. Dry with a dry, clean cloth.
Stainless Steel Surfaces
(on some models)
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface,
use warm sudsy water or a stainless steel
cleaner or polish. Always wipe the surface
in the direction of the grain. Follow the
cleaner instructions for cleaning the stainless
steel surface.
Glass Window
(on some models)
To clean the outside glass 'finish, use a glass
U)
cleaner. Rinse and polish with a dry cloth.
•Q..
.::
tn
.s
+-I
0
0
..c:
U)
eu
-
. .0
::l
e
.-:
t
0
8:
::l
V)
L­
eu
E
::l
U)
c:
0
U
28
Never cover the opening with aluminum foil
or
any other material.
Do not use steel-wood pads, commercial
oven cleaners, cleaning powders or other
abrasive cleaners. They will damage
the surface.
To inquire about purchasing stainless
steel appliance cleaner or polish, or to find
the location of a dealer or Mabe Canada
Parts Store nearest you, please call our
toll-free number:
National Parts Center
1.800.661.1616
www.GEAppliances.ca