Table of Contents
Advertisement
Stage Color LED
If you set each fixture to a different DMX address, each unit will start to "listen" to the
channel number you have set, based on the quantity of control channels (DMX channels) of
each fixture. That means changing the settings of one channel will only affect the selected
fixture.
In the case of the Stage Color LED™, which is a 7 channel fixture, you should set the
starting DMX address of the first unit to 1, the second unit to 8 (7 + 1), the third unit
to 15 (7 + 8), and so on. The chart on page 21 details the proper starting DMX address
dipswitch setting combination.
NOTE: The Stage Color LED contains a total of 10 dipswitches. Only use dipswitches
1~9 to set the DMX address. Dipswitch 10 is used to activate special functions that
are explained on page 12 of this manual.
©Elation Professional, Los Angeles Ca.
18
www.ElationLighting.com
Advertisement
Table of Contents
