Table of Contents
Advertisement
. OPERATION
6
Stand-Alone Mode: Stand-Alone operations are activated when dipswitch 10 is set to the
"ON" position. There are three stand-alone modes, Sound-Active, Auto Color Mix, and
Manual Color Mix. See below for the differences and functionality of the three different
modes.
1. Sound Active Mode – This mode will change colors to the beat of music (low
frequency sound). To activate sound-active mode be sure dipswitch 10 is set to the
"ON" position and dipswitch 9 is set to the "OFF" position. Then use the sensitivity
knob to make the fixture more or less sensitive to sound.
2. Auto Color Mix Control – This function will activate a built-in color fade program.
To activate this mode be sure dipswitches 9 and 10 are set to the "ON" position and
dipswitch 8 is set to the "OFF" position. Then use dipswitches 1 thru 7 to adjust the
color fade speed of the program.
3. Manual Color Mix (Static) – This mode allows the unit to be set to a single static
color and not be effected by sound. To activate this mode be sure dipswitches 8, 9,
and 10 are all set to the "ON" position. Then use the chart on page 13 to set color
©Elation Professional, Los Angeles Ca.
12
Stage Color LED
www.ElationLighting.com
Advertisement
Table of Contents
