Rio Carbon C Getting Started page 84

30gb player, playsforsure using the player

Hide thumbs Also See for Carbon C:

Table of Contents

Player-Computer Connections

•

Why does my Rio Carbon C experience errors after I unplug the USB cable?

Removing your Rio Carbon C from a USB connection before Idle is displayed on the screen may

result in a corrupting the player's file system. e.g. All tracks, although different, are assigned the

same name; the player will not power off; etc.

•

What should I do if my Rio Carbon C is not detected by my computer?

Verify that the USB cable is securely inserted into the USB port on both the Rio Carbon C and

your computer.

Connect the USB cable to a USB port on the back of your computer rather than to a USB port on

the front of your computer.

If using a USB hub, connect to a powered USB hub. Unpowered USB hubs may not work.

Connect the USB cable directly to your PC, bypassing any USB hubs.

Remove USB extension cables from the connection path.

Disconnect other USB devices.

•

My Rio Carbon C is in MTP mode but it is not being detected by Windows Explorer (My

Computer) on my Windows XP system. What should I do?

Both Windows XP Service Pack 1 (SP1) (or greater) and Windows Media Player 10 (WMP10)

must be installed for your computer to detect a Rio Carbon C set in MTP mode.

If you do not want to install SP1 (or greater) and WMP10 on your computer you should discon-

nect the Rio Carbon C and change the Transfer Mode setting to MSC mode.

Table of Contents