Fm Radio Settings - Rio Carbon C Getting Started

FM Radio Settings

Select to adjust FM radio settings, including region specific frequencies, FM tuner sensitivity, and
preset station slots.
1 Press MENU.
2 Select Settings.
3 Select FM Radio Setup.
4 Select Options, Store Preset, or Delete Preset option.
5 Select Done to apply settings or Cancel to return to the Settings menu.
• Options
FM Stereo Mode
Settings include On (the default setting), and Off. Selecting Off will place the FM tuner in mono
mode.
Region
Settings include USA (tunes by .2MHz, the default setting), Europe (tunes by .05MHz), and
Japan (tunes by .05MHz).
Sensitivity
Adjust the sensitivity of the FM tuner. If the sensitivity is set too high, the FM tuner may detect FM
frequencies that contain more static than actual FM broadcasts when scanning for stations. If the
setting is too low the FM tuner may skip even strong FM broadcasts when scanning for stations.
Settings include Medium (the default setting), High, and Low.
• Store Preset
The Rio Carbon C allows programming of up to 8 FM preset slots.
When in Manual mode, tune to a frequency you wish to store to a preset slot.
1 Press and hold CENTER to enter Store Preset mode.
2 Press FORWARD or REVERSE to cycle to the desired preset station slot.
3 Press CENTER to store the frequency to the selected FM preset slot. After a frequency has been
stored to a slot the Rio Carbon C will enter Preset mode.
• Delete Preset
Select to delete stored FM Radio preset channels.
Table of Contents
37