Connecting External Digital Audio Devices; Connecting External Analog Audio Devices; Connecting The Power Cable - JVC TH-F3 Instructions Manual

Preparation (continued)
Connecting external digital
audio devices
Output MD player or
satellite receiver
Main unit
(rear view)
Input
Optical digital cable
(not supplied)
To an optical digital
input terminal
Input
AV amplifier with
a built-in decoder
NOTE
• You can output the audio signal from the
[DIGITAL OUT] terminal when "DVD", "USB" or
"DGTL IN" is selected as the source in the dis-
play window.
• When "DGTL IN" is selected as the source in the
display window, digital audio from the
[DIGITAL OUT] terminal is decoded to a linear
PCM signal.
9
Do not connect the power cable until all other connections have been made.
To an optical digital
output terminal
Optical digital cable
(not supplied)
Output
Connecting external analog
audio devices
Output
Input
Main unit
(rear view)

Connecting the power cable

AC outlet
• Connect the power cable after you complete the
other connections.
• The [STANDBY ] lamp on the main unit lights
F
up.
Analog audio
device
Audio cable
(not supplied)
Main unit
(rear view)