Table of Contents
Advertisement
Search the available devices: click the Discover Device button
to re-search the connected print server within the network.
Resume the default settings: click the Factory Reset button to
reload the factory settings of NetServer Pro.
Update Firmware: click the Update Firmware button to update
the firmware of NetServer Pro.
1.9.3 Setting Up Windows XP TCP/IP Printing
Following is the correct procedure for setting up TCP/IP LPR printing
under Windows XP:
1. Click Start -> Printer and Faxes.
2. Double Click Add a Printer then click Next.
3. In the next windows, select Local Printer.
4. Create a new Standard TCP/IP Port then click Next.
5. Input the IP Address of NetServer Pro, and the Port name of the Port
that will be printed to, then click Next.
6. In the next page Select Custom, and click Settings.
7. Select LPR, and put the Port name in the field labeled Queue Name.
Then Click OK.
8. Click Next.
9. Click Finish
10. The Printer Install Wizard will now prompt for drivers. Select the
correct Make and Model, or click Have Disk, to provide the
Manufacturer's Driver Disk.
NetServer Pro
19
Advertisement
Table of Contents
