Table of Contents
Advertisement
Log
Number
Description
1
Log, Rear
2
Log, Diagonal/Left
3
Log, Diagonal/Right
4
Log, Front/Left
5
Log, Top/Right
6
Log, Front/Center
Catalog Number for the entire log set: 55M03
1
Align Groove At The Bottom
Locating Pins
Of Log (1) Over The Grate And
Push It Towards The Rear.
2
Align The Holes In One End Of Logs 2 and 3 Over The
Locating Pins And Align The Grooves On The Other
End Over The Grate And Push It Toward The Rear
Figure 57
EDV40 AND EDV45 LOG PLACEMENT
Locating Pin
3
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
1
2
4
6
Align The Hole On The Log (5) Over The Locating Pin
And Postition The Notch Over The Grate As Shown
4
Align The Groove In The Bottom Of Log (4)
Over The Grate And Slide It Toward The Front.
6
Position The Grooves On Log (6)
Against The Grate As Shown
3
5
5
29
Hide quick links:
Advertisement
Table of Contents
