Lennox EDV40RNM Installation Instructions Manual page 28

2
4
Locating Pins
2
Align The Holes In One End Of Logs 2 and 3 Over The
Locating Pins And Align The Grooves On The Other
End Over The Grate And Push It Toward The Rear
Figure 56
28
EDV35 LOG PLACEMENT
1
3
5
6
1
Align Groove At The Bottom
Of Log (1) Over The Grate And
Push It Towards The Rear.
Locating Pin
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Log
Number
1
2
3
4
5
6
Catalog Number for the entire log set: 55M02
Align The Hole On The Log (5) Over The Locating Pin
And Postition The Notch Over The Grate As Shown
4
Align The Groove In The Bottom Of Log (4) Over
The Grate And Slide It Toward The Front.
3
6
Position The Grooves On Log (6)
Against The Grate As Shown
Description
Log, Rear
Log, Diagonal/Left
Log, Diagonal/Right
Log, Front/Left
Log, Top/Right
Log, Front/Center
5