Circuit Adjustments; Setting The Service Adjustment Mode; Memory Write Confirmation Method; Adjust Buttons And Indicators - Sony KV-36FS12 Service Manual

KV-36FS12/36FS16/36FV16/36FV26
ELECTRICAL ADJUSTMENTS BY REMOTE COMMANDER
Use the Remote Commander (RM-Y168, RM-Y169, RM-Y170, RM-Y171) to perform the circuit adjustments in this section.
NOTE: Test Equipment Required:
• Pattern generator
• Frequency counter
• Digital multimeter
• Audio oscillator
5-1. SETTING THE SERVICE ADJUSTMENT
MODE
1. Standby mode (Power off).
Display Channel 5
2. Press
on the Remote Commander (Press each button within a
second).
Service Adjustment Mode In
Disp. Item
(Item) order
VP
HSIZ
Mode
3. The CRT displays the item being adjusted.
4. Press or on the Remote Commander to select the item.
5. Press or on the Remote Commander to change the data.
6. Press then
Service Adjustment Mode Memory
Item
Disp. Item
(Item) order data
VP 0 7
HSIZ TV
7. Press then
initialize.
Item
Disp. Item
(Item) order data
VP 7
0 WRITE
HSIZ TV
8. DO NOT turn off set until SERVICE appears.

CIRCUIT ADJUSTMENTS

+
Sound volume
Item
data
7 SERVICE
0
TV
to write into memory.
Green
SERVICE
Red
on the Remote Commander to
Carry out step 7 when adjusting
IDs 0 to 7 and when replacing
and adjusting IC002.
SECTION 5
5-2. MEMORY WRITE CONFIRMATION
METHOD
1. After adjustment, pull out the plug from the AC outlet, then
replace the plug in the AC outlet again.
Power
2. Turn the power switch ON and set to Service Mode.
3. Call the adjusted items again to confirm they were adjusted.
5-3. ADJUST BUTTONS AND INDICATOR
MUTING
DISPLAY
1
4
8
VOLUME
—
20 —
POWER
3
5
6
ENTER
RM-Y170