Special Playback For Dvd Audio - JVC SP-THD5S Instructions Manual

Adjusting the picture
quality (VFP)
You can adjust the picture mode.
1
2
Select the desired preset, then finish the setting.
Select
NORMAL Normally select this.
CINEMA Suitable for movies
USER1/ You can adjust parameters that affect
USER2 picture appearance. (See below.)
To adjust the picture tone
1
Select "USER1" or "USER2" (see above).
2
Select a parameter, then confirm the selection.
Select
Controls the brightness of the
GAMMA
neutral color
Controls the brightness of the
BRIGHTNESS
entire picture
CONTRAST Controls the contrast
SATURATION Controls the color depth
TINT Controls the tint
SHARPNESS Controls the sharpness
3
Adjust the parameter, then confirm the
selection.
Select
4
Repeat steps 2 and 3 to adjust others.
5
When connecting the TV to the HDMI MONITOR
OUT terminal ( 8), the VFP setting has no
effect.
Finish
Confirm
Confirm

Special playback for DVD Audio

Playing back a bonus group
Some DVD Audio discs have a "bonus group."
To play back a bonus group, you have to enter the specific
"key number" (a password).
1
Select a bonus group.
The key number entry screen appears.
On the TV
2
Enter the key number, then confirm the entry.
Enter the number
When the key number is accepted, playback starts and
the BONUS indicator goes off.
• If playback does not start, enter correct key number
again.
To clear the key number entry
Selecting browsable still
pictures
While playing back a track linked to browsable still pictures
(B.S.P), you can select the still pictures (turn the page).
• If a track is linked to browsable still pictures, they are
usually shown automatically during playback.
Select the desired still picture.
See page 21 for button
locations.
On the display
Confirm
26