Husky Trim Plus H1503TP Operator's Manual page 17

Tank has sufficient pressure.
Tank has sufficient pressure.
No electrical power.
No electrical power.
Blown shop/house fuse.
Blown shop/home fuse
Tripped shop/home breaker.
Tripped shop/home breaker
Thermal overload open.
Thermal overload open
Loss of power or overheating
Loss of power or overheating.
Pressure switch is bad.
Pressure switch is bad
Compressor will turn on when tank
Compressor will turn on when tank
pressure drops to cut-in pressure.
pressure drops to cut-in pressure
Check to be sure unit is plugged in.
Check to be sure unit is plugged in.
Replace shop/house fuse.
Replace shop/home fuse.
Reset shop/home breaker, determine
Reset shop/home breaker, determine
why problem happened.
why problem happened.
First unplugged the compressor and
wait until it becomes cool. After that
Motor will restart when cool
compressor can be used
Check for proper use of extension cord
Check for proper use of extension cord.
Replace pressure switch.
Replace pressure switch