Skoda Octavia Owner's Manual page 154

Explanation of graphic » Fig. 137
Control deactivated (vehicle detected).
A
Control activated (no vehicle detected).
B
Control deactivated (no speed stored).
C
Control activated (vehicle detected).
D
The ACC can consistently maintain the set speed of 30-160 km/h, as well as the
proximity to the vehicle ahead ranging from a very small to a very large time inter-
val.
The ACC adjusts the set speed with respect to the detected vehicle ahead, thus
maintaining the selected proximity.
If the ACC does not decelerate fast enough with respect to the vehicle ahead, the
symbol  and the following message both appear in the instrument cluster dis-
play.
Apply the brake!

Take over the steering and apply the brake!
The ACC can detect a vehicle that is up to approx.120m ahead using the radar
sensor .
Automatic stop-start

First read and observe the introductory information and safety warn-
ings on page 148.
Vehicles with an automatic transmission can decelerate to a standstill and start
moving again using the ACC.
Decelerate to a standstill
If a vehicle ahead decelerates to a standstill, the ACC will also decelerate your ve-
hicle to a standstill.
Starting to drive again after a holding period
As soon as the vehicle ahead starts moving again after a holding period, your ve-
hicle will also move and the speed will continue to be regulated. Control is auto-
matically disconnected in case of longer holding periods.
Take over the steering and apply the brake.
Operation Overview

First read and observe the introductory information and safety warn-
ings on page 148.
Overview of ACC functions operated with the lever
Deactivate ACC
1

Activate ACC (control deactivated)
2

Start control (adopt current speed) / Reduce speed by 1 km/h at a
 3 
time
   Set proximity level
4
Stop control (sprung position)
5

Start control (resume) / increase speed by 1 km/h at a time (sprung
6

position)
Increase speed by 10 km/h at a time
7
 
Decrease speed by 10 km/h at a time
8  
Note
If the lever is set » Fig. 138 from the position  directly into the sprung position
 , the current speed is stored and the control is started.

Fig. 138
Operating lever
151
Assist systems
