Wireless Interface Configuration
Configuring the Radio
6-10
•
IEEE 802.11a: Stations communicate in a data transfer range
between 6 to 54 Mbps. This standard operates in the 5 GHz U-NII band
using orthogonal frequency division multiplexing (OFDM). (Radio 2
only.)
■
[Update]: Updates the radio parameters.
Figure 6-1.
Setting the Radio Working Mode
To Set the Radio Working Mode:
Select Network Setup > Radio.
1.
Select the appropriate radio, 1 or 2, from the Radio drop-down.
2.
To enable the radio, click the Status On button.
3.
Select the radio mode, using the Mode drop-down.
4.
[Update]
5.
Select
to save the settings.