HP ProCurve 530 NA (J8986A) Management And Configuration Manual page 108

General System Configuration
Configuring Ethernet Settings
5-24
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# interface ethernet
ProCurve Access Point 530(ethernet)# no ip address dhcp
ProCurve Access Point 530(ethernet)# ip address
192.168.1.105 255.255.255.2
ProCurve Access Point 530(ethernet)# ip default-gateway
192.168.1.1
ProCurve Access Point 530(ethernet)# exit
ProCurve Access Point 530(config)# dns primary 204.127.202.0
ProCurve Access Point 530(config)# dns secondary
216.148.227.00
ProCurve Access Point 530(config)#
To display the current IP settings, use the show ip command as shown in the
following example.
ProCurve Access Point 530# show ip
IP Address Information:
System Host Name
IP Address
Subnet Mask
Default Gateway
DHCP Client
DNS Information (Manually entered):
Domain Name Suffix
Primary DNS Server
Secondary DNS Server 207.173.86.2
ProCurve Access Point 530#
HP-AP-200
192.168.15.200
255.255.255.0
192.168.15.254
Disabled
not set
209.63.0.2