Miele T 5206 Operating And Installation Instructions page 19

Fault
Drying times are
too long.
Possible Cause
The lint filters
might be clogged up.
Ventilation to and from
the dryer is insufficient
(e.g. in a small room).
The ventilation ducting or
room ventilation (e.g.
window or wall vents
are blocked).
The laundry was not suf-
ficiently spun.
Metallic components e.g.
zippers have prevented
the dryer from registering
the correct moisture level
in the laundry.
If after checking all the above, drying times are still too
long, there may be a fault. Contact the Service Dept.
The heater limiter has
automatically switched
off one or more
heater elements.
Problem Solving Guide
Remedy
– Clean as described in
"Cleaning and Care".
– Open a door or window while
the machine is operating to
increase air flow.
– Remove any objects that are
causing the blockage.
– Spin the laundry in the wash-
ing machine at the highest
possible speed.
– Complete the drying process
using a Timed Drying
progam.
– Contact the Service Dept.
19