Cleaning And Care; Cleaning The Lint Filters - Miele T 5206 Operating And Installation Instructions

Cleaning and Care

Cleaning the Lint Filters

The lint which occurs during drying
is collected in the lint filters in the
door and in the door opening.
Clean the filters after every
program to reduce drying time
and save energy.
^ Open the door and pull the lint filter
up out of the door holder.
^ Remove the lint from:
– the filter in the door
– the filters in the door opening
(do not use sharp or pointed ob-
jects.).
^ Remove any lint from the hollow part
of the door holder through the wide
slit at the bottom.
A cleaning brush is available at extra
cost from the Miele Spare Parts De-
partment.
16
^ Push the cleaned filter back into the
door holder and close the door.
If there is a great deal of compacted
lint on the filters, they can be
cleaned under hot running water.
^ The filter in the door opening should
only be removed for cleaning with
water (see illustration for instructions
on how to remove it).
^ After cleaning shake any excess wa-
ter off the filters.
^ Dry them carefully and thoroughly.
^ Replace the filters in the door open-
ing.
^ Replace the filter in the door, ensur-
ing it is fitted the correct way round in
its holder.