Table of Contents
Advertisement
WARNING: Hazardous Voltage. Shock or
electrocution can result. Unplug machine before servicing.
2. ASSEMBLY OF MACHINE
Cloth filter bag and secondary filter:
• Twist the lid anti-clockwise to expose inside bag
compartment. Be sure that the vacuum filter bag
and secondary filter are inside the bag
compartment before vacuuming. Close lid.
Suction hose, hand tubes and floor tool:
• Assemble the hand tubes and vacuum
hose by simply pushing them together.
Push the floor tool into the lower end of
the hand tubes.
5
• Connect the end of the suction
hose to the machine by turning
the hose connector one turn
anti clockwise.
MACHINE OPERATION
FOR SAFETY: Do not operate machine unless
operator manual is read and understood.
1. Fit lid with outlet positioned on the left or right of
machine for left or right handed vacuuming.
2. Wear machine as per the "Provac Comfort Fit
Procedure" on page 6.
3. Move to area requiring vacuuming.
4. Connect the plug to the main supply socket
outlet.
5. Turn the illuminated switch to ON.
6. Begin vacuuming floor. Operate the vacuum wand
and floor tool in a back and forth PENDULUM
LIKE motion whilst keeping your back upright.
DO NOT vacuum across your body.
7. Stay within the length of the power cord
when vacuuming.
8. To stop vacuuming, switch the machine off and
disconnect the plug from the main supply wall
socket. Do not pull on the cord as it will cause
damage. Pull from plug.
9. Always wind up the cord starting from the
machine end [not plug end] and hang it around
the handle/cord holder.
10. Move to next area and follow steps 1-9 or refer
to operator machine check list on completing
vacuuming.
FOR SAFETY: When using machine, do not unplug
by pulling on cord.
STORING MACHINE
Store machine in a dry area.
WARNING: Do not expose to rain.
Store indoors. Keep out of children's reach.
Advertisement
Table of Contents
