Diagnostic; Use As Access Point - EnGenius NET-EL-WSR-3018 User Manual

Wireless 11g Broadband Router
4.2.10

Diagnostic

This page allows you to test your connection in two ways: Ping and & Internet
connection.
IP Address: Enter the IP address that you would like to Ping, and then click on
the Ping button.
Connect to the Internet: Click on the Test Connection button to test the
Internet connection.
4.2.11

Use as Access Point

This page allows you to configure the router into Access Point mode, only acting as a
bridge between the computers attached to all Ethernet ports (LAN) and the clients on
the wireless LAN (WLAN). To operate in AP mode, the router must share the same
subnet mask as the other LAN and WLAN devices.
Version 1.0
26