Wireless 11g Broadband Router
3.4 Wireless Settings
In this step you can configure the basic wireless settings: SSID and channel.
SSID: Enter the SSID (Service Set Identifier) which is the network name (by
default: default). This is case-sensitive and cannot exceed 32 characters. All
wireless devices on the network must use the same SSID.
Channel: Select a channel number from the drop-down list.
devises on the network must use the same channel. If you are experiencing
interference, try a different channel.
Click on the Next button to continue.
3.5 Summary
In the last step of the typical configuration a summary page is displayed that lists the
settings that were just configured.
configuration.
Click on the Finish button to complete the
Version 1.0
All wireless
18