Wall Mounting The Ccu - Panasonic Digital Business System Installation Manual

March 1997

Wall Mounting The CCU

1 Using the dimensions given for the appropriate CCU size in the table below fix four mounting screws into
the wall leaving a 7mm protrusion to accept the mounting plate. Ensure the fixing method is appropriate to
the type of wall.
2 Fix the four mounting plates provided to the rear of the CCU using 2 screws per plate.
3 Lift the CCU and use the holes in the mounting plates to hang it on the screws mounted in the wall.
4 Tighten the screws to secure the CCU.
Panasonic Digital Business System - Installation Manual
Figure 2 - Wall Mounting The CCU
DBS 38
DBS 68
DBS 90
Table 1 - Mounting Point Dimensions
A B
335 mm 570 mm
445 mm 570 mm
445 mm 570 mm
7
Issue 5