Aspect Ratios; Menu; Back - JVC LT-40X776 User Manual

Button Functions
Aspect Ratios (Continued)
Press the A
• By pressing the A
When you change the aspect ratios, it is different from their broadcast or recorded program.
NTSC, 480i, 480p
ASPECT
PANORAMA
CINEMA
FULL
REGULAR
Notes:
• You can also choose the size by pressing the π † buttons.
• When you change the aspect ratio or signal, reset the picture position to center.
• You can also access the FRONT PANEL CONTROL screen by using the M
on the side of the TV instead of the remote control. It appears between INITIAL SETUP
and PICTURE ADJUST screen, and it has VIDEO STATUS and ASPECT menus. Choose
ASPECT by pressing Menu† on the side panel and choose a mode by using the C
√
+/- buttons ( OPERATE
• "SLIM" can only be dispalyed when the signal is ATSC (480i or 480p).
• If the televison receives a 16:9 signal from your HDMI device, the aspect mode will turn to
FULL automatically. If the television receives a 4:3 signal from your HDMI device when you
are in FULL aspect mode, it will return to REGULAR aspect mode. If you change the aspect
mode after the televison changed it to FULL automatically, the televison will change to the
aspect mode you choosed.
• If you are in Media Card Viewer mode, Aspect can not be used. (LT-40X776 Only)

Menu

The M button allows you to access JVC's onscreen menu system. Press M
ENU
the onscreen menu system.
• See individual topics like "Sound Adjust" for specific information on using menus.
OK
This button confirms your selection when you are in one of the onscreen menus.

Back

This button allows you to go back in the menu to change a selection or correct a mistake.
68
button
SPECT
button, you can change the size.
SPECT
HD (1080i, 720p)
ATSC (1080i, 720p)
PANORAMA ZOOM
CINEMA ZOOM
®
).
ASPECT
FULL
ATSC (480i, 480p)
ASPECT
PANORAMA ZOOM
CINEMA ZOOM
FULL
SLIM
button
ENU
HANNEL
to activate
ENU