Digital-In; Digital-In Audio - JVC LT-40X776 User Manual

Initial Setup

Digital-In

The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a 480p picture
signal is being input to the DIGITAL-IN terminal. This option adjusts the position when a 480p
picture signal is being displayed on the screen. There are two types of 480p picture signals:
640x480 and 720x480. If the displayed picture is slightly shifted, the position can be adjusted
by selecting either SIZE1 or SIZE2.
Press the M
To DIGITAL-IN
π †
è
To enter
To select AUTO, SIZE1 or SIZE2
π †
Press the M
Notes:
• The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the
Digital-In terminal and the picture is being displayed on the screen.
• You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, the
televison will select "SIZE1" or "SIZE2" automatically.

Digital-In Audio

This feature is used if you have a DTV or HDMI
compatible component connected to your TV.
Press the M
To DIGITAL-IN AUDIO
π †
è
To select "ANALOG", "DIGITAL" or "AUTO"
Press the Menu button when fi nished
Notes:
• If your DTV or HDMI component is capable of digital audio and video, choose DIGITAL. If
your DTV or HDMI component is capable of analog audio and digital video, choose ANALOG.
• Refer to your DTV or HDMI component's instruction manual for more information.
• When you select DIGITAL, select PCM on Digital Sound in the Digital Setup menu. See page
71.
• When you select AUTO, the television will select "ANALOG" or "DIGITAL" automatically,
depending on the audio input from the HDMI.
52
button
ENU
button to finish
ENU
button
ENU
INITIAL SETUP
PREVIOUS
VIDEO-1MONITOR OUT
DIGITAL-IN
DIGITAL-IN AUDIO
NEXT PAGE
SELECT OPERATE
INITIAL SETUP
PREVIOUS
VIDEO-1MONITOR OUT
DIGITAL-IN
DIGITAL-IN AUDIO
NEXT PAGE
SELECT OPERATE
OFF
SIZE1
DIGITAL
(1/5)
EXIT
MENU
OFF
SIZE1
DIGITAL
(1/5)
EXIT
MENU