Sleep Timer; Ml/Mts - JVC LT-40X776 User Manual

Button Functions

Sleep Timer

The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals
of 15 minutes, for a total time of up to 180 minutes.
Press the S
20 seconds before the automatic shutoff, this message will appear:

ML/MTS

MTS technology allows several audio signals to be broadcast in analog at once, giving you a
choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an
MTS broadcast may also include a second audio program (SAP).
Press the ML/M
By every press of the M
the mode
Notes:
• When you are receiving a digital broadcast, if there are other languages, you can change the
language by pressing the M
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono sound only.
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
• MTS unavailable if your television's Input source is in input 1, 2, 3 or 4 mode, as described
on page 61.
• ML/MTS will not work when you are using the Digital-In.
• You can also change the mode by pressing the π † buttons.
64
button
LEEP
0 15 30 45 60 75 90 105 120 135 150 165 180
Sleep Timer Message
PUSH SLEEP TIMER BUTTON
You then have 20 seconds to press the S
delay the shut off for another 15 minutes.
button
TS
/M
L TS
/M button.
L TS
GOOD NIGHT!!
TO EXTEND
button, you change
button to
LEEP
STEREO
ON AIR
ON AIR
MTS
SAP
MONO