Set Up - JVC LT-32Z48 Instructions Manual

Set Up

Set Up
Auto Program
Edit / Manual
Language
VIDEO Setting
Teletext Language
HDMI-1 Audio Setting Auto
HDMI Mode Setting
PC Setting
Auto Program Automatically registers the channels
Auto Program
CH 02
0%
Edit/Manual
"Editing channels" (P. 10)
g
Language Select a language for the menus
Language
VIDEO Setting "Setting video terminals" (P. 25)
g
Teletext Language
Select a language for Teletext programmes
(P. 9, 28)
ENGLISH
Note
"PC Setting" is only available when
"AV Select" is set to "PC". (P. 15)
Edit
PR ID CH/CC
_ _ _ _ _
AV
01 CH 02
02 CH 03
03 CH 04
04 CH 05
05 CH 06
06 CC 01
07 CC 02
Edit channels
g"Editing channels" (P. 10)
HDMI-1 Audio
Set to "Digital" or "Auto" for HDMI devices,
or "Analogue" or "Auto" for DVI devices.
Setting
(Not available for HDMI-2 and HDMI-3.)
HDMI Mode Setting For setting the HDMI input
If there is no picture displayed on the
screen, set "Mode" to "1" or "2".
HDMI Mode Setting
HDMI- 1
Mode 1
HDMI- 2
Mode 2
HDMI- 3
Mode 2
PC Setting
For setting the PC input
PC Position:
PC Setting
Adjust screen position
PC Position
Phase
Phase:
Pixel
Sets the focus of the screen.
Pixel:
Adjusts the horizontal feature of the screen.
Adjust the position of the PC image
PC Position
Reset position
A select "PC Position"
B enter
A adjust
B set
(blue)
g
24