Adjusting The Select Lever Control Cable And Shift Rod - Yamaha YFM400FAR Service Manual

ADJUSTING THE SELECT LEVER CONTROL CABLE AND SHIFT ROD

BLEEDING THE HYDRAULIC BRAKE SYSTEM/
3 - 42
WARNING
Check the operation of the brake after
bleeding the brake system.
*****************************************************
ADJUSTING THE SELECT LEVER
CONTROL CABLE AND SHIFT ROD
1 NEUTRAL
2 FORWARD
3 REVERSE
4 Control cable
5 Select lever shift rod
WARNING
Before moving the select lever, bring the
machine to a complete stop and return the
throttle lever to its
Otherwise the transmission
damaged.
1.Adjust:
Rear brake pedal free play
G
Refer to "ADJUSTING THE REAR BRAKE".
2.Adjust:
Select lever control cable
G
Select lever shift rod
G
*****************************************************
Adjustment steps:
Control cable:
Remove the rear brake light switch cover 1.
G
G
Make sure the select lever is in NEUTRAL.
G
Adjust the control cable so there is zero free
play in the cable. When the adjustment is
correct, slack in the return spring 2 will be
taken up.
NOTE:
In some cases it will be necessary to further
adjust the cable with
arrangement that holds the cable to its mount.
CHK
ADJ
closed position.
may be
3
the locknuts