Table of Contents
Advertisement
10.4 Setting ( lead time / follow-up time) options
Options
Lead time
00 Min.
Follow-up time
10 Min.
Exit
MENU
Select
OK
Back
Z
10.5 Ending the active timer
10.6 Deleting a timer position
Note:
– If you want to record channels via your video or DVD re-
corder, these devices must be programmed accordingly.
– If you use the electronic programme guide (EPG), the data is
transferred automatically.
This menu enables the individual shifting of the actual
switch-on and switch-off times in both directions (lead time
and follow-up time), regardless of the preset switch-on and
switch-off times.
• To activate the function "Options" in the "Timer" menu: press
the (blue) button.
▼
▲
• Use
/
to select "Lead time" or "Follow-up time" and
◀
▶
use
/
to set the forward or backward time (0 ... 60
minutes).
• To return to previous menu: press the Z button.
• To finish your setting: press MENU.
Once the timer starts a channel, the selection of channels is
locked.
• To prematurely stop the timer: press the MENU button.
– The screen shows: Cancel Timer?
• Confirm with OK.
▼
▲
• Use
/
to select the timer position to be deleted.
• Press the (red) button.
- 31 -
- 31 -
Advertisement
Table of Contents
