Bodywork; Markings; Drain Plugs And Filler Caps - Atlas Copco QAS 14 Instruction Manual

2.2 Bodywork

The alternator, the engine, the cooling system, etc. are enclosed in
a sound-insulated bodywork that can be opened by means of side
doors (and service plates).
The recess in the roof has a lifting rod in the middle.
!
Never use the guiding rods to lift the generator.
To be able to lift the generator by means of a forklift, rectangular
holes are provided in the frame.
The earthing rod, connected to the generator's earth terminal is
located at the side of the frame.

2.3 Markings

A brief description of all markings provided on the generator is
given hereafter.
Indicates that the engine exhaust is a hot and harmful
gas, which is toxic in case of inhalation. Always make
sure that the unit is operated outside or in a well-venti-
lated room.
Indicates that these parts can become very hot during
operation (e.g. engine, cooler, etc.). Always make sure
that these parts are cooled down before touching them.
Indicates that the generator may be refuelled with die-
diesel
sel fuel only.
Indicates the drain for the engine oil.
Indicates the drain for the coolant.
Indicates the drain plug for the engine fuel.
PAROIL
Use 15W40 oil only.
15W40
Indicates the different earthing connections on the gen-
erator.
Indicates the lifting eye of the generator
Indicates that the guiding rods may not be used to lift
the generator. Always use the lifting rod in the roof of
the generator to lift it.
Indicates that the alternator should not be cleaned with
high pressurised water.
2954 2100 01
Indicates the battery switch
Indicates that the unit may start automatically
and that the instruction book has to be consult-
ed prior to use.
Read the instruction manual before using the
lifting eye.
QAS 14 Pd, QAS20 Pd
Indicates the partnumbers of the different
Yearly (max. 500h) 2912 6041 04
Every 1000h 2912 6042 05
Every 2000h 2912 6043 06
service packs and of the engine oil.
Engine oil
PAROIL 15W40 PAROIL 5W30
5 l 1615 5953 00 1604 6060 00
(1.3 US gal)
These parts can be ordered to the factory.
20 l 1615 5954 00 1604 6059 00
(5 US gal)
210 l 1615 5955 00
(55 US gal)
Engine coolant Engine coolant Engine coolant Engine coolant Engine coolant Engine coolant Engine coolant Engine coolant Engine coolant Engine coolant Engine coolant Engine coolant Engine coolant Engine coolant Engine coolant Engine coolant Engine coolant Engine coolant Engine coolant Engine coolant Engine coolant PARCOOL EG PARCOOL EG PARCOOL EG PARCOOL EG PARCOOL EG PARCOOL EG PARCOOL EG PARCOOL EG
Engine coolant Engine coolant PARCOOL EG PARCOOL EG PARCOOL EG PARCOOL EG PARCOOL EG PARCOOL EG PARCOOL EG PARCOOL EG PARCOOL EG PARCOOL EG PARCOOL EG PARCOOL EG PARCOOL EG PARCOOL EG PARCOOL EG
5 l 1604 5308 00
(1.3 US gal)
20 l 1604 5307 01
(5 US gal)
210 l 1604 5306 00
(55 US gal)

2.4 Drain plugs and filler caps

The drain holes for the engine oil, the coolant and the plug for the
fuel, are located and labelled on the frame; the fuel drain plug at the
front, the others at the service side.
The drain flexible for engine oil can be brought to the outside of the
generator through the drain hole.
! The drain hole can also be used to guide external fuel
tank connections. When connecting an external
fueltank, use the 3-way valves. Refer to "External
fueltank connection (with/without quick couplings)".
The filler cap for the engine coolant is accessible via an opening in
the roof. The fuel filler cap is located in the side panel.
Instruction manual
Indicates the 3-way valve.
9