HP 8200zl Configuration Manual page 162

Multicast Listener Discovery (MLD) Snooping
Displaying MLD Status and Configuration
7-16
The specific form of the command might look like this:
ProCurve# show ipv6 mld vlan 8 config
MLD Service Vlan Config
VLAN ID : 8
VLAN NAME : VLAN8
MLD Enabled [No] : Yes
Querier Allowed [Yes] : Yes
Port Type
---- --------- + --------- ----------------- ----------
A13 100/1000T | auto
A14 100/1000T | auto
A15 100/1000T | auto
A16 100/1000T | auto
A17 100/1000T | auto
A18 100/1000T | auto
A19 100/1000T | auto
A20 100/1000T | auto
A21 100/1000T | auto
A22 100/1000T | auto
A23 100/1000T | auto
A24 100/1000T | auto
Figure 7-7. Example of an MLD Configuration for a Specific VLAN
The following information is shown, if the specified VLAN is MLD-enabled:
■ VLAN ID and name
■ whether MLD is enabled on the VLAN (default NO, but the information
for this VLAN will be listed only if MLD is enabled)
whether the switch is allowed to act as querier on the VLAN
■
| Port Mode Forced Fast Leave Fast Leave
No
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes