Pioneer VSX-1016V-K Service Manual page 245

5
Display (VSX-1016V-K, VSX-1016V-S)
1 2
11 12 13 14
1 SIGNAL indicators
Light to indicate the currently selected input signal.
AUTO lights when the receiver is set to select the input
signal automatically.
2 Program format indicators
These change according to which channels are active in
digital sources.
L - Left front channel
C - Center channel
R - Right front channel
SL - Left surround channel
S - Surround channel (mono)
SR - Right surround channel
SBL - Left surround back channel
SB - Surround back channel (mono)
SBR - Right surround back channel
LFE - Low frequency effects channel
3 Digital format indicators
Light when a signal encoded in the corresponding format is
detected.
4 OVER / ATT
OVER lights to indicate that the level of an analog source is
too high. ATT lights when you use the attenuator
(ANALOG ATT) to reduce it.
5 VIDEO CONV.
Lights when digital video conversion is enabled.
6 V.SB
Lights during Virtual surround back processing.
7 Sound processing indicators
Light according to the active sound processing feature.
8 TUNER indicators
TUNED - Lights when a broadcast is being received.
STEREO - Lights when a stereo FM broadcast is being
received in auto stereo mode.
MONO - Lights when the mono mode is set using the
MPX button.
5
6
3 4 5 6
9 EON / RDS indicators
EON - Lights when the EON mode is set (flashes during
EON reception). The ? indicator lights when the current
station carries the EON service.
RDS - Lights when an RDS broadcast is received.
10 Master volume level
11 Speaker indicators
Indicate the current speaker system, A and/or B.
12 Listening mode indicators
THX - Lights when a Home THX mode is selected.
ADV. SURROUND - Lights when an Advanced
Surround mode has been selected.
STEREO - Lights when stereo listening is switched on.
STANDARD - Lights when a Standard Surround mode
is switched on.
13 SLEEP
Lights when the receiver is in sleep mode.
14 Matrix decoding format indicators
2 PRO LOGIC IIx - This lights to indicate 2 Pro Logic
II / 2 Pro Logic IIx decoding.
Neo: 6 - When one of the Neo:6 modes of the receiver
is on, this lights to indicate Neo: 6 processing.
15 Character display
Displays various system information.
16 SR+
Lights when the SR+ mode is switched on.
VSX-1016V-K
6
7
7 8 9
15
7
8
A
10
B
16
C
D
E
F
245
8