Installation
B
A separated audio connection is necessary.
C
If the source device has an analog audio output
connector, connect the source device audio output to
DVI Audio In port located on the left side of the HDMI
port.
How To Use
•
If the source device supports Auto DVI function,
the output resolution of the source device
will be automatically set to the appropriate
resolution1280×720p for the 32" TV and 1920 x 1080
for the 37" and 42" TVs.
•
If the source device does not support Auto DVI, you
need to set the output resolution appropriately.
To get the best picture quality, adjust the output
resolution of the source device , if available, to
1280×720p.
INPUT button to select the corresponding
•
Press the
HDMI input source.
Connecting Headphones
You can connect a set of headphones to your set
if you wish to watch a TV programme without
disturbing the other people in the room.
Plug a set of headphones into the 3.5mm mini-jack
socket on the side panel of the set.
Note
Prolonged use of headphones at a high volume
R
may damage your hearing.
You will not receive sound from the speakers when
R
you connect headphones to the system.
EN-11
Haier LED HDTV
Power source
TO USE AC POWER SOURCE
•
Use the AC polarized line cord provided for
operation on AC. Insert the AC cord plug into a
standard polarized AC outlet.
Note
Never connect the AC line cord plug to other than
R
the specified voltage. Use the attached power cord
only.
If the polarized AC cord does not fit into a non-
R
polarized AC outlet, do not attempt to file or cut
the blade. It is the user's responsibility to have an
electrician replace the obsolete outlet.
If you cause a static discharge when touching the
R
unit and the unit fails to function, simply unplug
the unit from the AC outlet and plug it back in. The
unit should return to normal operation.
Wider Hole
and Blade
Polarized AC Cord Plug
Service Manual
Model No.: HL42XLE2
AC Outlet
23