Storing Your Iron - Hamilton Beach UltraSteam Instructions Manual

Iron Guard Soleplate Cover

Storing Your Iron

1. When finished ironing, turn the
Temperature
Control Dial to
OFF ( 0 ) and
unplug iron. Set
iron on its heel
and let cool.
NOTE: If you have the Iron Guard
Soleplate Cover, you can store the hot
iron immediately.
2. Empty all water in iron. If the water is
not emptied, it may
interact with the
metal of the iron
and cause the
water to discolor.
This will result in
8
If Retractable Cord Handle
comes off, it is designed to snap
back in place.
1. Place pins of handle into slots
in reel. See illustration.
Retractable
Cord 2. Lift handle up until it snaps in place.
Handle
(not available on all models)
There is no need to wait for the iron to
cool before storing. Make sure the iron
has been turned off and unplugged.
Place the Iron Guard soleplate cover
on the iron immediately after ironing.
CAUTION: The soleplate may be hot,
so care must be used in placing the
cover on the soleplate.
steam and water droplets discoloring
clothing. Carefully hold iron over sink
with water tank opening aimed down.
Let all water drain out.
3. To clean the soleplate wipe with a
wet cloth and dish detergent.
Wipe clean with a damp cloth. Do
not use abrasive cleaners.
CAUTION: Be sure iron is cool prior
to cleaning.
4. To maintain good steam production,
clean the iron periodically using the
self-clean setting described in the
"Self Clean II System" section.