Features - Hamilton Beach UltraSteam Instructions Manual

Features

Auto Shutoff Reset Button/Light
Self Clean II System
1. Fill the water tank with water
(5 oz/130 ml).
2. Plug in iron and turn Temperature/
Steam Dial to highest setting.
Let iron preheat 4 minutes.
3. Leave Temperature/Steam Dial at
highest setting and
unplug iron. Hold
iron in ironing
position over a
sink. Repeatedly
push the Blast of
Steam Button to
aid in the cleaning process.
4. Be careful. Steam and hot water will
pour out of the steam vents. This
cleans the vents. Allow all water to
empty from the water tank. This will
take about two minutes.
6
1. The timing of the automatic shutoff
Auto Shutoff
starts when the iron is plugged in.
Reset Button
The Auto Shutoff Reset Button/Light
will come on.
2. About 1 hour after the iron is plugged
in, the light in the Auto Shutoff Reset
Button will go out which means the
iron has automatically shut off.
3. Press the Auto Shutoff Reset
Button/Light. This will turn the iron
on for another hour and the light will
come back on.
4. If the iron is plugged in and the
Temperature/Steam Dial is turned
to OFF ( 0 ), the automatic shutoff is
still activated.
5. Do not use salt, vinegar, or
commercial iron cleaners to clean
the inside of the iron.
6. Turn Temperature/Steam Dial to OFF
( 0 ). This cleans the
steam valve inside
the iron.