Invacare Rea Clematis User Manual page 12

5
A
E
12
C
B
D
5. Headrest
You attach the neckrest by putting it into the
reciver on the backrest and fasten it with the
knob (B).
Adjust the position with the lever (A) and nuts
(C). Adjust the height by loosening the knob (B).
Part (E) is a memory function for the height of the
neckrest. When the desired height is achieved,
loosen the screw on the memory and lower it
towards the back. Fasten the screw again.
Pay attention to how far the headrest is raised.
If the red marking (D) is visible, the headrest
is raised too high.
®
CLEMATIS