Fujitsu Lifebook User Manual page 43

To install or remove a memory module,
hold it by the edge and be careful not to
touch any component and IC.
Memory module is made of materials
sensitive to human body static charges.
Before handling a memory module,
always touch an appropriate metal
object to discharge static charges from
your body.
Please remember to turn off the
notebook before you begin to install or
remove a memory module. If the
notebook is placed in standby or
hibernate mode while the memory is
removed, data may be lost or corrupted.
This may also damage the memory
module.
1. Turn off the notebook and disconnect the
AC adapter from it.
2. Close the LCD panel and place the
notebook upside down.
3. Remove the screw(s) securing the
memory compartment slot cover and
remove it.
Remove the battery compartment cover at
the bottom of the notebook.
32
LB_Fennec 04 (30-34)
4. Install the memory module
Insert the memory module into the slot with
the notch in the memory module aligned with
the projection on the connector, and push
the memory module down unit it locks in
place with a click sound.
Notch in the memory module
5. Attach the memory compartment cover
and secure it with screws.
Attach the cover removed in step 3.
Memory
compartment
cover
32
Memory
compartment
cover
4/1/07, 03:48 pm