Fujitsu Lifebook User Manual page 25

Figure 4: OmniPass Enrollment Wizard – Capturing
Fingerprint
OmniPass will now capture the fingerprint of
the finger selected for OmniPass enrollment. It
will takes up to three fingerprint captures for
the enrollment (see Figure 4).
Figure 5: OmniPass Enrollment Wizard – Fingerprint
Verification
After OmniPass has successfully capturing
your fingerprint, you will need to verify the
enrolled fingerprint (see Figure 5). You will
need to repeat the action as you have done in
the capturing fingerprint section done as
shown in Figure 4.
14
LB_Fennec 02 (12-25)
As seen in Figure 5, upon successful
verification, the window will show a green
capture in the window and the text Verification
Successful beneath the window. Click Next to
proceed.
OmniPass recommends that you enroll at least
two fingers (see Figure 6) and if you choose to
enroll the second finger, please repeat the
process as shown in Figure 3, Figure 4 and
Figure 5.
Figure 6: OmniPass En rollment Wizard – OmniPass
Figure 7: OmniPass Enrollment Wizard – Audio,
In this section (see Figure 7), you can
customize the OmniPass with your preferred
audio prompt, taskbar tips as well as
Authentication Window setting.
14
recommends at least two fingers
Taskbar, Authentication Window Setting
28/12/06, 02:48 pm