Changing The Internal Battery Pack - Fujitsu Lifebook User Manual

CHANGING THE
INTERNAL BATTERY
PACK
Before changing the internal battery
pack, turn off the notebook and
disconnect the AC adapter from it. To
avoid shock hazards and damage to
your notebook, be careful not to touch
internal components of the notebook,
including the battery connector.
Changing the internal battery
pack
1. Turn off the notebook and disconnect the
AC adapter from it.
2. Close the LCD panel and place your
notebook upside down.
Close the LCD panel gently. Do not exert
excessive pressure to it. Failure to do
so may damage the LCD panel.
3. Remove the battery pack.
While pressing the latches that lock the
battery, push the battery outwards in the
direction of the arrow as shown.
30
LB_Fennec 04 (30-34)
4. Install a new battery pack.
Press the latches on the battery pack and
align it to fit into the battery compartment of
the notebook. When the battery falls in place,
push the battery inwards as shown and
release the latches.
After removing the internal battery pack,
please take necessary precautions to
prevent it from being shorted. For
example, you can seal the connector
ends with insulating tape. After removing
the battery pack, do not mix it with other
types of battery.
The internal battery pack contains
recycle material.
30
Battery Release Latches
Battery Compartment
Battery Release Latches
Battery Compartment
4/1/07, 03:48 pm