Sony UP-DR250 Manual page 19

To load the paper roll
Note
Be careful that your fingers and clothing are not caught in
the paper door or on the protuberance in the opening of the
door.
1
Press and lower the paper door lever, hold the paper
door at the center portion, and pull the door forward
until it locks into the open position.
2
Remove the paper core.
3
Insert the paper core into the paper roll.
The two sides of the paper core are the same shape.
You can insert either side.
4
Depending on the width of your paper roll, attach or
remove the paper adapters.
Paper with 127-mm (5-inch) width: 2UPC-R253
series and 2UPC-R255 series Printing Pack
Attach the blue paper adapter to the left side of the unit,
and the pink paper adapter to the right side. (When the
factory is shipped, the paper adapter is attached.)
blue
Press the portions indicated by the arrows until the tabs at
the top lock into place.
Loading the Paper Roll and Ink Ribbon
pink
19