Power Cord; P Utting It Together - Bissell 1425 Series User Manual

A
uto Care Proheat® Product Features (Continued)

Power Cord

The Power Cord, with a three-prong plug, stores
on the back of the Auto Care Proheat® by
wrapping around the Quick-Release Cord Wrap.
NOTE: Unwrap the Power Cord completely before
operating the unit.
WARNING:
Do not use an extension cord with
this product. The use of an extension
cord may result in a severe electrical
shock, particularly if the extension
cord does not have an electrical
rating higher than that of the product,
OR if the extension cord does not
have a three-prong grounding plug
and if the extension cord is not
plugged into a circuit box with a
ground fault circuit interrupter. Safety
precautions such as keeping all
connections off the ground and dry
will not eliminate the danger.
P
utting It Together
Assembling your Auto Care Proheat®
is a simple process.
1.
Take the Flex Hose Clip and slide the back plate
into the opening on the front of the unit. You will
hear a "snap" when it is locked in place.
If your model includes a TurboBrush Tool,
2.
Slide the TurboBrush Clip into the guides on the
Vacuum Flex Hose storage bracket, on the back of
the unit.
6
w w w . b i s s e l l . c a
WARNING:
Do not use this product while on
any type of ladder. Do not place
the product in a place where
it will be stepped on or kicked
while in use. Do not place the
product on an elevated surface
where it may be pulled off the
surface while in use.
1 2
1 - 8 0 0 - 2 6 3 - 2 5 3 5