General Troubleshooting - Baumatic BWDI1206 User Manual

Fully integrated washer dryer
Table of Contents

Advertisement

General troubleshooting

If your appliance does not appear to be functioning correctly, please
refer to the table below before calling the Customer Care Helpline.
Malfunction
Does not work
on any program.
Does not fill with
water.
Water does not
drain away.
Water on floor
around the
washer dryer.
Does not spin.
Spinning starts
late or the
machine does
not spin.
Machine vibrates
a lot during spin.
Door will not
open.
Spin speed
increases.
Cause
1) Plug not in socket.
2) Not switched on.
3) Power failure.
4) Fuse blown.
5) Door open.
1) See above.
2) Tap turned off.
3) Program selection
knob not correctly
positioned.
4) Fill hoses are
kinked.
1) Kink in discharge
hose.
2) House drain is
blocked.
1) Leaking gasket
between tap and
water inlet hose.
2) House drain is
blocked.
3) Soap drawer
blocked with soap
residues.
1) Water has not yet
drained away.
2) "No Spin" selected.
1) The imbalance
control system has
activated because the
laundry is unevenly
distributed in the
drum.
2) If the laundry is still
not evenly distributed
after 10 minutes, the
machine will not spin.
1)
Washer dryer not
completely level.
2)
Transit brackets
not removed yet.
3)
Load not
distributed evenly.
1) Two minutes have not
elapsed since the program
finished.
1) During drying the drum
will accelerate to a higher
speed to distribute the
load and optimise the
Solution
1) Plug it in.
2) Switch it on.
3) Check.
4) Check.
5) Close door.
1) Check.
2) Turn tap on.
3) Position the program
selection knob correctly.
4) Straighten the fill hoses.
1) Straighten discharge hose.
2) Clean drain.
1)
Replace gasket and tighten
hose and tap well.
2)
Clean drain.
3)
Clean soap drawer.
1) Wait a few minutes for
machine to empty.
2) Reset button to choose a
spin speed.
1) The appliance will redistribute
the laundry by reversing the
drum rotation. This may take
several attempts before the
laundry is evenly distributed and
normal spinning can resume.
2) In the event of this,
redistribute the load manually
and select the program again.
1) Adjust the adjustable feet.
2) Remove the transit brackets.
3) Rearrange the laundry
evenly.
1) Wait two minutes.
N/A
32

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents