Remote Controller - Automatic Operation - Rinnai R2339 Operation Manual

REMOTE / THERMOSTATIC CONTROLLED OPERATION

REMOTE CONTROLLER - AUTOMATIC OPERATION

Setting the Current Time and Day of the Week
A/M A/M
14
Step 1. With the controller 'OFF', press and hold the 'T' button
'HOUR' and 'AM or PM' will flash.
If no buttons are pressed within 10 seconds the display will revert back to 'Initial Set-Up Screen'
retaining the last entered setting.
NOTE
Step 2. To select the hour push the 'UP' button
that AM or PM is chosen by cycling through the 12 hour range.
Step 3. Press the 'OK' button
will flash.
STEP 4
UP
OK OK
A/M A/M T T P P PWR PWR
DOWN
15
Step 4. To select the minutes push the 'UP' button
chosen.
Step 5. Press the 'OK' button
will flash.
Step 6. To select the hour push the 'UP' button
Step 7. Press the 'OK' button
To adjust time for Daylight Saving time
To adjust time or to adjust for daylight savings follow Steps 1 and 2 then press 'OK' button
keep the minutes and the current day.
When changing batteries all settings will be lost and the controller will revert back to the 'Initial
setup screen'. Re-setting of time, date and programming will be necessary.
NOTE
Rinnai Australia
STEP 1
UP UP
OK OK
T P P PWR PWR
DOWN DOWN
15
11 to enter the selected hour and AM or PM. 'TIME' + 'MINUTES' + 'AM or PM'
STEP 5
10
UP UP
OK
A/M A/M T T P P
DOWN DOWN
to enter selected minutes, One of the days SU, MO, TU, WE, TH, FR or SA
11
to enter the selected day and to complete time and day setup.
11
STEP 2
10
UP
OK OK
A/M A/M T T P P PWR PWR
DOWN
or 'DOWN' button
10
STEP 6
UP
OK OK
PWR PWR A/M A/M T T
DOWN
11
15
10 or 'DOWN' button
or 'DOWN' button
10
4
STEP 3
UP UP
OK
A/M A/M T T P P PWR PWR
DOWN DOWN
14 for approximately 2 seconds. 'TIME'
until the desired hour is chosen, note
15
10
P P PWR PWR A/M A/M
15 until the desired minutes are
until the desired day is chosen.
15
Sapphire Controller Operation Manual
11
,
STEP 7
UP UP
OK
T T P P PWR PWR
DOWN DOWN
11
11 , three times to