Advertisement
Not all truck beds are assembled 100% square, so it may be necessary to do some preliminary
adjustments. The mounting holes in the front brackets are slotted to allow for adjustment.
With your cover closed, take a quick inspection to make sure that it is not touching the bed on either
side or the tailgate. If it appears square or close to square go on to Step 4, pages 11 and 12. If it is making
contact with the side of the truck or the tailgate, you may wish to make some adjustments before going
to the final step.
To adjust the cover front to back evenly, move both of the front brackets forward or backward
accordingly. To adjust one side or the other, move the front brackets forward or backward independently.
Any questions you can call tech assistance Monday through Friday, 8 a.m. – 5 p.m. Central Time (866) 900-8800.
Very Important: Periodically check your truck for rubbing. Make slight
adjustments when necessary.
FORM # IG2110HH
Modified Mar 2009
Model 2110 Ford Explorer Sport Trac 2007-Current
Page 10
Advertisement
