Notes On Link Connector; Notes On Lcd Display Panel - Pioneer CDJ-2000 Service Manual

1

1.4 NOTES ON LINK CONNECTOR

If the LINK connector (JA1301) is replaced during a repair of the MAIN Assy, detach the label from the old connector then
attach it to the new connector.
A
As an IEEE 802.3-based MAC address specific to this unit has been printed on the ID Label Assy (AXW7015-T-J) be sure to
attach it.
B
MAIN Assy
C

1.5 NOTES ON LCD DISPLAY PANEL

D
As the panel for the LCD display is of transparent type, any dirt inside the panel is highly visible. Be careful not to trap dirt or
dust inside when reassembling the LCD display, and check that there is no dirt or dust trapped inside after reassembling.
E
F
8
1
2
ID Label Assy
CDJ-2000
2
3
3
4
4