Error Display List - Pioneer CDJ-2000 Service Manual

5

[4] Error display list

WAVE display shows "E-XXXX: DISC DRIVE ERROR".
Note: An alarm port is a function which outputs a pulse from the test port of Main CPU and tells an unusual part by the
number of pulses.
Error
Display Word
Code
E-7001 DISC DRIVE ERROR
E-7010 DSP DEVICE ERROR
E-7020 USB-B DEVICE ERROR
E-7021 PHY CHIP ERROR
E-7022 PANEL CPU ERROR
E-7023 GUI CPU ERROR
E-7024 MAIN CPU ERROR
E-7025 CDC DEVICE ERROR
E-7101 INTERRUPT EXCEPTION
E-7201 TOC READ ERROR
E-8301 PLAYER ERROR
E-8302 PLAYER ERROR
E-8303 PLAYER ERROR
E-8304 DECODE ERROR
E-8305 DATA FORMAT ERROR
E-8306 NO FILE
E-8709 COMMUNICATION ERROR
E-9101 MECHANICAL TIMEOUT
5
6
Contents
The ATAPI drive doesn't function normally.
The DSP doesn't function normally.
The program isn't available for download.
The USB-B controller doesn't function
normally.
The PHY CHIP doesn't function normally.
The panel microcomputer doesn't function
normally.
The GUI CPU doesn't function normally.
The main CPU doesn't function normally.
CDC for needle pads does not operate
normally.
The abnormalities which are not expected
on a main CPU occurred.
TOC Data can't be read.
Abnormalities occurred during starting.
Abnormalities occurred during playback.
Other abnormalities occurred.
It is the file which cannot be performed
normally.
It is the file which cannot be performed
normally.
The registered file does not exist.
GUI CPU and MAIN CPU cannot be
communicated.
Mechanism operation was not completed
within regulation time.
CDJ-2000
6
7
Remarks
∗
∗
∗
It becomes this error when communication with
PANEL is not materialized in the abnormalities
in wire connection etc. It becomes this error
when update of PANEL goes wrong. MAIN
detects and an error code is transmitted to GUI.
∗
It becomes this error when update of GUI goes
wrong. GUI displays an error code spontaneously
in emergency mode.
* If GUI breaks truly, a display will not come out
at all.
∗
It becomes this error when update of MAIN goes
wrong. MAIN transmits an error code to GUI by
emergency mode.
∗
CDC=Capacity Digital Converter
∗
When the communication with MAIN is not
materialized by the abnormalities of connection,
GUI displays an error code spontaneously.
When MAIN does not operate completely, it will
be in this mode.
∗ New
7
8
A
Alarm port
correspon-
dence
_
_
_ B
_
_
_
C
_
D
E
F
51
8