Pioneer VSX-49TXi Service Manual page 171

5
Displays & Controls
Display
All the display information is explained and/or referenced here.
1 2 3 4
3
E O N
RDS RF ATT
9 8 7
SIGNAL SELECT indicators
1
Light to indicate the input signal you selected.
ANALOG : Lights when an analog signal is
selected.
: Lights when the receiver is set to select an
i.LINK component.
DIGITAL : Lights when a digital signal is selected.
2RF : Lights when an 2 RF signal is selected.
AUTO : Lights when the receiver is set to select
the input signal automatically.
2 Program Format indicators
For Dolby Digital or DTS sources :
tors change according to which channels are
active in the source. When all three LS (left
surround), S (surround) and RS (right surround)
light at the same time it means a source with a
6.1ch playback flag is being used.
L – Left front channel.
C – Center channel.
R – Right front channel.
LS – Left surround channel.
S – Surround channel (mono).
RS – Right surround channel.
LFE – Low frequency effects channel.
3
((( ))) – Lights when LFE signal is input.
4 Analog level indicators
OVER – This lights if the signal is in danger of
distorting for analog source signals. Press
INPUT ATT on the front panel to lower the
signal level.
ATT – Lights when INPUT ATT is used to
reduce the level of the analog source signal.
5 Character display
Shows current mode, status, etc.
5
6
5
6 Digital format indicators
signal is detected.
detected.
selected.
ing.
These indica-
ing.
ing.
processing.
playback.
7 Speaker indicators
Light to indicate the current speaker system, A
and/or B.
8 TAPE 2 indicator
Lights when the TAPE 2 monitor is on.
9 TUNER indicators
MONO : Lights when the tuner is set to receive
FM broadcasts and when selected MPX mode.
STEREO : Lights when a FM stereo broadcast
is received in the auto stereo mode.
TUNED : Lights when a broadcast is received.
VSX-49TXi
6
7
: Lights when a Dolby Digital
: Lights when a DTS signal is detected.
: Lights when an MPEG signal is
: Lights when the HOME THX mode is
: Lights during Surround EX matrix process-
: Lights when a decoding DTS ES audio.
: Lights during DTS ES discrete process-
: Lights during DTS ES matrix process-
: Lights during Dolby Pro Logic II
: Lights during Neo: 6 processing.
: Lights during two-channel
7
8
A
6
Neo :6
B
C
D
E
F
171
8