Factory Mode Adjustments - Samsung LN32A550P3R Service Manual

4. Troubleshooting

4-3. Factory Mode Adjustments

4-3-1 Entering Factory Mode
To enter 'Service Mode' Press the remote -control keys in this sequence :
- If you do not have Factory remote - control
EU/Asia
S-America
4-3-2 How to Access Service Mode
Using the Customer Remote
1. Turn the power off and set to stand-by mode
2. Press the remote buttons in this order; POWER OFF-MUTE-1-8-2-POWER ON to turn the set on.
3. The set turns on and enters service mode. This may take approximately 20 seconds.
4. Press the Power button to exit and store data in memory.
- If you fail to enter service mode, repeat steps 1 and 2 above.
5. Initial SERVICE MODE DISPLAY State
Panel On Time (Hour) XXXX
Option Table (Service) 20 20 20 20 20 20 20 20 20
WB Adjust
Information
Checksum
Advanced Menu
T-PRLMSAM-0000 (Main Micom Name/Ver) Month / Day / Year / Hour / Min. / Sec.
T-PRLPEUS-0000 (Sub Micom Name/Ver) Month / Day / Year / Hour / Min. / Sec.
- "T_PRLMEAM-0000" and "T_PRLPEUS-0000" are fi rmware.......
6. Buttons operations withn Service Mode
Menu
Direction Keys /
Direction Keys /
Source
4-18
INFO MENU
Mute 1
XXXX
Full Menu Display/Move to Parent Menu
Item Selection by Moving the Cursor
Data Increase / Decrease for the Selected Item
Cycles through the active input source that are connected to the unit
Mute Power On
8 2
XXXX (Source)
Power On