Select Mode - Midland ct210 User Manual

DTMF Code
In Channel/Frequency mode, press PTT and digit a number on the keypad.
Flank keys
PTT + CALL: push to enable a
1750Hz tone

Select Mode

Hold down and turn on the power: the radio can switch between the Channel
and Frequency mode. Repeat the procedure to pass to the other mode.
In Frequency mode, press
Channel+Frequency mode.
To store a frequency
To store a frequency and its settings (CTCSS,DCS, SHIFT REPEATERS etc)
follow the procedure below:
1. at first, choose all the settings to store,
2. press the button,
3. then, push ,
4. rotate the Encoder knob and select the memory number where you want to
store the frequency and its settings.
5. confirm your selection by pressing
(note: a triangle displayed underneath the channel number indicates that it has
already been stored).
8
PTT: push to transmit and release
it to receive
MONI: push it to monitor the
frequency in use
to switch between the Frequency mode and
.