Using Monitor Mode - Midland MXT275VP4 Manual

To "lock" and "unlock" the keypad:
1. Be sure the radio is turned on (see Power On/Off)
2. Press and hold the Lock button for three seconds.
▪
The Keypad Lock icon will show on the LCD display when the
keypad is "locked."
3. Repeat steps 1 and 2 to "unlock" the keypad.
▪
The Keypad Lock icon will turn off when the keypad is "unlocked".

Using Monitor Mode

Monitor mode lets you check for activity on the current active channel. You
can also use Monitor mode to adjust the volume of your radio when not
receiving a signal.
To enter and exit Monitor mode:
1. Be sure the radio is turned on (see Power On/Off)
2. Be sure you have selected the desired channel (see Selecting the
Active Channel)
3. Press and release the Monitor button to enter Monitor mode. (the
display will show the Monitor icon if the radio channel is busy)
▪
You will hear any activity on the current selected channel.
4. Press and release the Volume Buttons to increase or decrease the
volume
5. Once the volume has been adjusted to the desired level, press and
release the Monitor button to exit Monitor mode.
Page 16
Model MXT275
midlandusa.com